Skip to content
Kazuki UnzeiKendo Bogu Advisor

Home / About

About

Kazuki Unzei

運勢 一輝 — Kendo Bogu Advisor

Making kendo equipment, repairing it, developing it, selling it.
I speak from having done all four.

Kendo equipment and tools laid out on a workbench, mid-repair.
14yrsMaking, repairing, developing and selling kendo equipment (since 2012)
2013Devised the Tornado Stitch method (product development)
4servicesEducation, consulting, technology and community
JP/ENAvailable in both Japanese and English
Career

Career

  1. 2012Joined Nihon Budogu Seizo in Kuji, Iwate (now the Mitsuboshi factory). Monday to Friday, making kote futon. On Saturdays, over the mountain in Natsui, studying under Mr. Hayashishita (林下) of Budogu Isshin (武道具一心) — from how to hold a needle, through kote repair, to making do, men, tare and kote. Roughly two years of that.Iwate, Kuji — Nihon Budogu Seizo
  2. 2013Devised the "Tornado Stitch" method for kote futon. Tozando released it in 2014 and patented it in 2016.Tornado Stitch — devised 2013, released 2014, patented 2016
  3. 2015Moved to Tozando's head office in Kyoto. Sharpened the craft on the retail floor, hearing customers directly.Tozando head office — retail floor
  4. 2018Moved to a bogu shop in Canada, to see from the inside how kendo equipment is handled outside Japan.Moved to Canada
  5. 2022.01Went independent and founded my own budogu business.Founded own budogu business
  6. 2026.10Left the shop I had been running jointly, over a difference in direction. Began working as a kendo bogu advisor belonging to nobody, across four areas: education, consulting, technology and community.Kendo Bogu Advisor
Lineage

Where the technique comes from

Kuji is where Mitsuboshi, the budogu wholesaler, first began manufacturing — as a domestic judogi factory, more than seventy years ago. Later the town turned seriously to kendo bogu, and the man who taught them was Mr. Suzuki (鈴木謙伸) of Urawa — of Suzuki Kendogu, still spoken of as the finest in Japan. The craftsmen he trained either stayed in the factory and perfected their work, or left to open workshops of their own. That is the place where I learned.

What this region is known for is machine-stitched bogu. Make the stitch pitch and the rows too fine and the padding packs solid: it goes board-hard and loses its cushioning. Armour meant to protect you, so stiff that it hurts. The answer to that contradiction was the wide-pitch stitch, pitch-zashi — a way of stitching that began in Kuji.

Even so, as someone who still trains, I felt it did not absorb enough. Adding padding only adds weight. Could the same padding be made not to hurt at all? That question led me to devise the Tornado Stitch in 2013.

Experience

What I have done

Craft & RepairMaking bogu; repair of men, kote, do and tare
DevelopmentConcept, specification, materials, sample evaluation, OEM. Devised the Tornado Stitch method in 2013
RetailRunning a budogu shop: sourcing, pricing, customer service
E-commerceOnline retail, product page design, custom orders turned into a system
InternationalOverseas sales and customer support, with a focus on North America, in Japanese and English
Concept

Why an advisor?

A kendo bogu craftsman has always belonged to one shop or one manufacturer, supporting that company's making, repair and product development. It is a system that has worked for a long time, and it is the system in which I learned my own trade.

But in that shape, the technique and the knowledge stay inside the company. As price competition grew harder, lowering cost came before improving how things are made, and more and more products were built to a price rather than to a standard.

The result is that what good equipment actually is, where to look to judge quality, how to repair something so it lasts — the things a craftsman simply knows — never reach the practitioner, or the industry as a whole.

Outside Japan this is far more obvious. There is nobody nearby who can repair, so even good bogu becomes disposable. And if it is going to be thrown away, cheaper is better. Equipment built to last stops selling, and only the simplest construction survives. The gear stops helping people improve, and more of them leave kendo while they are still beginners.

I moved to Canada to stop that, and I started my own company. Carry good equipment, put the craftsman and the repair service in front. I believed that was the right answer.

It was not enough. One company flying the flag for quality, holding its technique close, changed nothing. The harder I pushed repair and quality, the further the shops around me moved toward cheap, easily replaced products. I think, in part, I made the very thing I was fighting move faster.

Alone, I could not change it. So now, rather than making and selling myself, I stand on the side that teaches and advises — sharing the technique instead of hiding it. I want to find people who are pointing the same way. Belonging to nobody is not a rejection of the old system — it is one more option placed beside it. Open the craft and the knowledge equally to retailers, to manufacturers, to craftsmen and to practitioners. That is what KENDO BOGU ADVISOR. FOR ALL. means.

The cycle we are trying to break

This is the loop I want to cut.

  1. Nobody nearby can repair it

  2. Even good bogu becomes disposable

  3. Price becomes the only thing people choose on

  4. The gear stops helping, and people leave kendo

And then the money stops reaching the craft, so fewer people can repair — and round it goes.
It has to be cut somewhere. I chose to cut it by increasing the number of people who can repair.

Craftsmanship should be shared.

技術を、閉じない。

Knowledge should not belong to one company.

知識を、一社のものにしない。

Craftsmanship for the future of kendo.

職人の経験を、次の世代へ。

Know good equipment properly. Repair the good things, and keep using them.

For All

Who "for all" actually means.

  • Practitioners剣道家

    How to tell good equipment from bad, how to choose the set that suits you, how to care for it and repair it. The knowledge to buy, and to repair, without second-guessing.

  • Retailers武道具店

    Product knowledge, sourcing, judging quality, handling repairs, e-commerce and overseas sales. For those about to open, the whole thing as a launch package.

  • Manufacturersメーカー

    Product planning, manufacturing methods, building quality standards. From the perspective of someone who knows the bench, making products that do not lean on price alone.

  • Craftsmen職人

    Sharing repair and making technique, and passing it to the next generation — so that what one person has carried alone does not end with them.

  • Those about to learnこれから学ぶ人

    Courses you can take with no experience, and a clear path to certification. I want the way into this trade to be as wide open as it can be.